AEG 95751 Operating And Installation Manual page 3

Gas hob
Table of Contents

Advertisement

Ensure a good ventilation around the appliance. A poor air supply could cause lack of oxygen.
Ensure that the gas supply complies with the gas type stated on the identification label, placed near
the gas supply pipe.
The use of a gas cooking appliance results in the production of heat and moisture in
the room in which it is installed. Ensure that the kitchen is well ventilated: keep natural
ventilation holes open or install a mechanical ventilation device (mechanical extractor
hood).
Prolonged intensive use of the appliance may call for additional ventilation, for
example opening of a window, or more effective ventilation, for example increasing
the level of mechanical ventilation where present.
Once you removed all packaging from the appliance, ensure that it is not damaged and the electric
cable is in perfect conditions. Otherwise, contact your dealer before proceeding with the
installation.
The manufacturer disclaims any responsability should all the safety measures not be
carried out.
Service
Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out
by unexperienced persons may cause injury or serious malfunctioning. Refer to your local
Service Centre. Always insist on genuine spare parts.
Environmental Information
After installation, please dispose of the packaging with due regard to safety and the environment.
When disposing of an old appliance, make it unusable, by cutting off the cable.
These instructions are only for the countries stated by the symbol printed on the
front cover of this instruction book.
39

Advertisement

Table of Contents
loading

Table of Contents