Go-Video TW1730 User Manual page 37

You can change the video source of the PIP window to any externally connected device.
Shortcut: Press the SOURCE button.
● The source of the PIP window is changed to the next video signal of any externally
connected device.
N N
N N
Press the MENU button.
● The OSD MENU is displayed.
Select FUNCTION SETUP using the
TV CH+/- buttons and then press the
VOL+ button.
Select PIP SETUP using the TV CH+/-
buttons and then press the VOL+ but-
ton.
● The PIP SETUP menu is displayed.
Select PIP SOURCE using the
TV CH+/- buttons and then press
the VOL+ button.
Select the desired external input signal.
● The video source is changed in the
following order: TV ➔ VIDEO ➔
S-VIDEO ➔ DTV
Press the EXIT button to exit the
menu.
● Since this product has a single tuner, you cannot watch two TV
channels simultaneously in PIP mode.
o o t t e e
o o t t e e
Operation
37