Go-Video TW1730 Quick Reference Manual

TW1730
UNPACK YOUR LCD TV
• TW1730 LCD TV (1)
• Remote control (1)
• 1.5V AAA alkaline batteries (2)
• Audio/video cable (1)
• RF (Antenna) cable (1)
• User's guide (1)
• Quick reference guide (1)
• Warranty registration card (1)
• AC Adapter (1)
INSERT REMOTE CONTROL BATTERIES
1 Remove battery cover on back of remote control.
2 Insert two 1.5V AAA batteries, paying attention to the
correct polarities (+/-).
3 Replace cover.
BASIC SETUP
1 Connect the RF cable from your antenna or cable TV jack to the ANTENNA IN jack on the back panel of the LCD TV.
2 Connect the supplied AC Adapter to the POWER DC12V jack on the back panel of the LCD TV and plug it into a wall outlet.
3 Rotate the power switch on the front panel downward to turn on the unit.
• When you turn the power ON, the screen appears and the POWER/STANDBY light is turned off.
• When you turn the power OFF, the screen goes blank, and the POWER/STANDBY light turns on.
LCD TV
MEMORIZE CHANNELS
1 Press MENU to bring up the on-screen menu system.
2 Use the / buttons to select CHANNEL SETUP, and press
3 Use the / buttons to select ANTENNA and press
4 Use the / buttons to select TV or Cable and press
• Choose whichever channel source you connected in Step 3 above.
5 Use the / buttons to select AUTO PROGRAM, and press
• The TV automatically searches for all available channels and stores them to memory.
This takes approximately one or two minutes.
6 Press EXIT to exit the menu system.
1
Read Me First
Unpacking & Initial Setup
PHONE S-VIDEO
.
.
2
VIDEO INPUT
VIDEO L - AUDIO - R
From
Antenna
.
.
3, 4
From
OR
Cable TV
5