Changing Channels - Go-Video TW1730 User Manual

Changing Channels

You can change channels on your LCD TV by using the TV CH+/- buttons, or by direct selection
using the number buttons. You can use the number buttons to tune to any channel (even one that has
been erased or has not been memorized).
Using the CHANNEL buttons
Press the TV CH+/- buttons to change channels.
The TV changes each channel in order, up or down, depending on which button
you press. You will see all the channels that the TV has memorized (the TV must
have memorized at least three channels). You will not see channels that were not
memorized or have been erased.
Using the NUMBER buttons
To select single-digit channels (0~9) faster, press "0" before the single digit.
Example: For channel 4, press "0", then "4".
To select channel 100 or higher, press the 100 button first.
Example: For channel 122, press "100",then "2", then "2".
Viewing the Previous Channel
Press the LAST CH. button on the remote control to select the last channel you
were watching.
Procedures for Using the TV
27