Connecting A Vcr Or Dvd Player - Go-Video TW1730 User Manual

Connecting a VCR or DVD Player

Connecting the Video/S-Video and Audio Jack
Do not connect the Video cable and the S-Video cable at the same time.
You should connect only one cable at a time.
Connection Procedures
VCR or DVD Player
Connect the antenna cable to the ANTENNA IN terminal on the back of your VCR.
Connect the VIDEO/AUDIO INPUT jack of the TV and the video/audio output jack of your VCR or DVD
with the video/audio cables (connect the cables to the terminals of the same color).
• You can use the S-Video cable to connect a VCR or a DVD player for better video quality.
• If your VCR does not support stereo sound, connect the mono audio out jack to the AUDIO
INPUT (left) jack.
To watch a video with a VCR (A/V Connection)
Turn the TV on, and select 'VIDEO' using the
LINE button on the remote control.
• If you have connected an S-Video cable,
select 'S-VIDEO'.
Turn the VCR on, insert the tape, and press the
Play button.
LINE INPUT
PHONES S-VIDEO VIDEO
Video Cable
or
S-Video Cable
To TV
S-VIDEO VIDEO
Connections
L - AUDIO - R
Audio Cable
ANT
L - AUDIO - R
VIDEO
15