Channel Add/Delete; Clock (Auto); Clock (Manual) - Go-Video VR4940 User Manual

Initial Setup (Continued)

Channel Add/Delete

This feature allows you to manually add or delete chan-
nels from your channel list.
1 1
Follow steps 1-3 as shown under Auto Channel
Set.
2 2
Use v / V to select the CH. Add/Del option.
3 3
Press B to move to the third level.
The Edit icon is highlighted.
4 4
Press ENTER.
The Channel Edit menu appears.
Ch. 2
0-9 Input
5 5
Use v / V or 0-9 to select a channel to add or
delete then press ENTER.
The Add or Delete icon is highlighted.
6 6
Press ENTER to confirm your setting.
7 7
Repeat steps 5-6 to add or delete additional
channels.

Clock (Auto)

The DVD Recorder+VCR gives you two ways to set the
time and date: Auto or Manual. Auto is the default setting
and enables the DVD Recorder+VCR to set the clock
whenever the DVD Recorder+VCR is off or in Standby
mode.
Tuning Band
Auto Channel Set
CH. Add/Del
Clock
TV Aspect Ratio
Progressive Scan
Factory Setting
1 1
Press SETUP.
The Setup menu appears.
2 2
Use v / V to select the General option.
3 3
While the General option is selected, press B to
move to the second level.
4 4
Use v / V to select the Clock option.
5 5
Press B to move to the third level.
Add
Delete
Return
Auto
Manual
Time Zone Auto
Daylight
Auto
Savings
Prev. Select
6 6
Use v / V to select the Auto option then press
ENTER.
The Auto option is set at the factory. In the Auto option,
the DVD Recorder+VCR looks for a channel carrying XDS
(Extended Data Services) information. XDS updates the
clock using the Coordinated Universal Time.
7 7
Use v / V to choose your Time Zone.
You can set your local Time Zone manually. When Time
Zone is set to Auto, the DVD Recorder+VCR will use XDS
information to determine the proper setting.
8 8
Use B to choose the Daylight Saving option.
Use v / V to choose Auto, On, or Off.
You can turn Daylight Savings On or Off manually. When
set to Auto, the DVD Recorder+VCR will use XDS infor-
mation to determine the proper setting.
9 9
Press ENTER to confirm your setting, then
press SETUP to exit the Setup menu.
ote
If your local TV station does not send date and time informa-
tion, or sends incorrect information, you can set the clock man-
ually.

Clock (Manual)

1 1
Follow steps 1-5 as shown under Clock (Auto).
2 2
Use v / V to select the Manual option then
press ENTER.
Tuning Band
Auto Channel Set
CH. Add/Del
Clock
TV Aspect Ratio
Progressive Scan
Factory Setting
3 3
Enter the necessary information for date and
time.
b / B (left/right): Moves the cursor to the previous
or next column.
v / V (up/down): Changes the setting at the current
cursor position.
4 4
Press ENTER to confirm your setting, then
press SETUP to exit the Setup menu.
Auto
Manual
Year 2003
Date /
1 1
Time :
12 00 AM
Select
19