One Touch Recording (Otr); Record Speed - Go-Video DV2130 User Manual

One-Touch Recording (OTR)
One-Touch Recording (OTR) allows you to add recording time in
30-minute increments up to 9 hours and 30 minutes at the touch of
a button.
1 Start Recording
Follow the instructions on page 55 to begin recording.
2 Activate OTR
While in Record mode, press the REC button again to activate
One-Touch Recording (OTR).
• Record length 0:30 appears on the On-Screen Display and the
DVD+VCR will record for exactly 30 minutes.
3 Add Recording Time
Continue pressing REC to add recording time in 30 minute
increments up to 4 hours.
• The DVD+VCR stops recording automatically when the recording
time has elapsed. If you press POWER during OTR recording,
the DVD+VCR will power off automatically when the recording
time has elapsed.

Record Speed

You can slow down the recording speed from SP to SLP in order to fit
six hours of programming on a T-120 tape.
1 Start Recording
Follow the Basic Recording instructions on page 55.
2 Set Record Speed
Press the SP/SLP button on the remote control to set the Record
Speed to one of the following options:
• SP – Standard Play, for best quality.
• SLP – Super Long Play, for maximum recording time (3 times SP).
NOTE: The selected Record Speed will appear on the front panel
display and on-screen display.
Maximum Recording Time - SP vs. SLP
Tape Length SP (Standard Play)
T-120
T-160 2hrs 40 mins
T-180
SLP (Super Long Play)
2 hrs
3 hrs
6 hrs
8 hrs
9 hrs
RECORD
0:00:00
SP
0:30 - 1:00 - ...
OTR 0:30
- 9:00 - 9:30
0:00:00
SP
ENTER
2
REC SP/SLP CLEAR DISC MENU
SUBTITLE MODE ANGLE MARK
LAST CH REPEAT TIMER SEARCH/IDX
57