Pcm Down Sampling - Go-Video DV2130 User Manual

PCM Down Sampling

Language : English
Front Display : Auto
PCM Down Sampling : On
30
If your amplifier is not capable of reproducing a 96kHz signal, PCM
downsampling should be set to On.
1 Open "Initial Setup" menu
Press the SETUP button while the DVD is in Stop mode.
2 Select "DVD"
/
Use the œ ƒ
to select.
3 Select "Audio"
/
Use the œ ƒ
select.
4 Set "PCM Down Sampling"
/
œ ƒ
Use the
‹
press the
• On - When a 96kHz audio disc is played, it will be downsampled
and output at 48kHz.
• Off – When a 96kHz disc is played, it will be output at 96kHz.
On
Off
buttons to highlight "DVD", then press ENTER
buttons to highlight "Audio", then press ENTER to
buttons to highlight "PCM Down Sampling", then
button to select one of the following options: