Page 3
Earwrap Use & Wearing Headband Use & Wearing Proper Positioning Attach Clothing Clip Converting from Earwrap to Headband Left Ear Wearing Left Ear Wearing Proper Positioning Attach Clothing Clip Converting from Headband to Earwrap...
Page 4
Ringer Volume Selector: Three position adjustment to set the volume of the telephone ring; top position sets to Hi, middle position sets to Low, bottom position turns ringer Off. 10. Dial Mode Switch (bottom of phone, not pictured): sets the phone...
Page 5
Connecting the System Connect all Cords. Optional Connections Headset Cord Telephone Cord Fax/Modem/Data Cord (not included): transmit data across the phone line when the phone is not in use. External Audio Cord: 3.5mm phono plugs to connect MP3, CD player or computer soundcard for listening through the...
Page 6
Standard Configuration Setting Up for Use Set the Dial Mode Switch on the bottom of your phone to “t” for touch tone dialing or to “p” for pulse dialing. Set the Ringer Volume Selector to your preferred setting: top position sets ring to “hi”, middle position sets ring to “low”, bottom position sets ring “off”.
Page 7
Placing and Answering Calls Put the headset on and press the On/Off Button to place or answer a call. The On/Off Button illuminates when On. While on a call, set the Speaker Volume Control so you can hear the other party clearly and comfortably.
Page 8
Memory Dial Button for the stored number. Using the External Audio Feature With the telephone Off (no LEDs illuminated), turn on your audio device (such as a CD player). You should now hear the CD player through your headset.
Page 9
(“Warranty Period”). The obligation of GN Netcom, Inc. under this warranty shall be limited to repair or replacement, at GN Netcom, Inc.’s option, without charge, of any part or unit that proves to be defective in material or workmanship during the Warranty Period, provided the product is returned to GN Netcom, Inc.
Page 10
GN Netcom, Inc., is not a “defect” covered by this Warranty. In such cases, GN Netcom, Inc. may charge you for materials and labor, even during the Warranty Period. It is the owner’s responsibility to operate and care for this product in accordance with the operating instructions and specifications supplied with the product;...
Need help?
Do you have a question about the GN 4170 and is the answer not in the manual?
Questions and answers