GN 9050 2.4 GHz Wireless Headset System Charge battery for 3 hours prior to initial use. User Guide...
Page 2
Components Remote Beltpack Base Base Stand Telephone Cord Remote Battery AC Power Adapter Headset (included with System purchase or as an option) Remote Headset Adapter (Quick Disconnect to 2.5mm cord adapts your existing headset for remote use-included with non-System purchase)
Page 3
Mode Recharging the Battery Slide the Remote into the Charger on the front of the Base. To use your Headset while charging, put the system in Headset Mode. To charge overnight, put the system in the Handset Mode. Use the charging port on the rear of the Base to charge a second battery (optional).
Remote and Base are not illuminated). Simultaneously press the increase Volume Button (+) as well as the Mute Button for 3 seconds and release. The Headset Mode Indicator light on the remote lights up indicating you are in Ring Setting Mode. Use the Volume Control on the Remote to select one of the four available options: Maximum, Medium, Minimum, Mute.
Accessories Battery To prolong operating time from 6 to 12 hours, an additional Battery can be purchased (GN Netcom part number 1601-809). ReadiLine Remote Handset Lifter with GN ReadiLine Interface Kit The Remote Handset Lifter lifts the handset from your telephone enabling you to answer and hang up calls without returning to your desk.
Need help?
Do you have a question about the GN 9050 and is the answer not in the manual?
Questions and answers