Memory Reset; Registering A New Master Headset; Cleaning And Replacing Parts - Jabra GN 9120 User Manual

Gn netcom user guide cordless telephone gn 9120

Hide thumbs Also See for GN 9120:

Table of Contents

Available languages

Enlarged version

Memory reset

When the battery is removed or the power adapter is unplugged (for at least a few sec-

onds), all customised headset settings are returned to factory-set default settings.

A new master headset may be registered to the product in case of loss or damage to

the original headset. To register a new master headset, complete the following:

1. Unplug the power adapter for a couple of seconds.

2. Place the new master headset into the base unit.

3. Plug the power adapter back to the power socket.

4. All lights ﬂ ash for app. 4 seconds. After this only the battery indicatorwill be lit.

5. The new headset is now ready for use.

The earcushion and earplate may be cleaned or replaced. When cleaning, use water

only and a little washing-up liquid if required.

• To clean or replace the earplate (5), ﬁ rst remove the earplate from the headset

receiver.

• To clean or replace the headset's earcushion (6), gently peel it off the earplate.

• The headset is equipped with a rechargeable battery. For replacing the battery,

please read the instructions in this guide carefully. Only GN Netcom-approved bat-

teries can be used.

No other parts can be replaced by the user.

Table of Contents