Table of Contents
Advertisement
Technical specifications
Height x Width x Depth
Depth with the door open
Height adjustment
Empty weight
Load (according to the programme)
(Different load sizes in some countries are due to different measuring
Use
Permissible ambient temperature
This appliance complies with the following EC directives:
-
73/23/EEC of 19/2/1973 "Low voltage directive"
-
89/336/EEC of 3/5/1989 "EMC directive" including modification
directive 92/31/EEC.
Electrical connection
Specifications concerning the power supply are indicated on the rating
plate. The rated voltage and the type of current stated on the plate
must correspond to those which exist where the dryer is installed. Also
refer to the rating plate for the type of fuse required.
Permanent connection must be carried out only by a qualified engineer.
Warning! THIS APPLIANCE MUST BE EARTHED.
The manufacturer declines any liability should this safety measure not
be observed.
Before switching on, make sure the electricity supply voltage is the
same as that indicated on the appliance's rating plate. (See picture on
page 11). This machine is designed to operate on a 220-230 V, single-
phase, 50 Hz supply. Check that your domestic electrical installation can
take the maximum load required (2.6 kW), also taking into account any
other appliances in use.
Warning! A cut off plug inserted into a 16 amp socket is a serious safe-
ty (shock) hazard.
Ensure that the cut off plug is disposed of safely.
Permanent connection
In the case of permanent connection it is necessary that you install a
double pole switch between the appliance and the electricity supply
(mains), with a minimum gap of 3mm between the switch contacts
Technical specifications
85x60x57 cm
107 cm
6 mm
32 kg approx.
max. 5 kg
methods)
Domestic
+5°C to +35°C
25
Hide quick links:
Advertisement
Table of Contents
