Table of Contents
Advertisement
Smoething not working?
Problem
The drying cycle
exceptionally takes a
long time
The loading door
cannot be closed
The drier ends the dry-
ing cycle automatically:
EiND indicatoris illumi-
nated shortly after pro-
gramme start
The drying cycle excep-
tionally takes a long
time. 4,5 hours after
starting the drying cycle:
EiND indicator is illumi-
nated - drying cycle is
aborted - programme
run indicator flashes
If these operating instructions do not offer sufficient advice to eli-
minate a specific fault, please contact our customer service.
24
Possible cause
Vented air transport disrupted
Lint filter blocked
Lint filter not installed and/or fil-
ter lid not locked in position
Too little or too dry laun-
dry loaded for selected
programme
button depressed and
Lage temp.
filling quantity too large
Filling quantity too large
Laundry too wet
Remedy
Straighten N- air venting hose
and/or clean air venting ducts
Clean lint filter
Install lint filter and/or lock filter lid
in position
Select time programme or hig-
her drying level (for instance
EXTRADROOG instead of INTEN-
SIEFDROOG)
Check programme selection: only use
Lage temp. -button for laundry quan-
tities up to 2,5 kg. Clean lint filter.
Reduce filling quantity
Predry laundry more thorougly
Hide quick links:
Advertisement
Table of Contents
