Package Contents; System Requirements; Welcome - Globalsat BU-303 (SiRF III), BU-353 (SiRF III) User Manual

PACKAGE CONTENTS

- USB GPS Receiver
- Driver CD-ROM with User's Guide and test utility for WIN and Mac O/S*
•
WIN Users please refer to the root directory on the included CD-ROM for installation instructions
and drivers.

SYSTEM REQUIREMENTS

The Globalsat USB GPS receivers requires a Windows, or Macintosh laptop computer, with a CD-
ROM*, USB port, and NMEA compatible navigation software. The 3
software may have its own system requirements, please check with software vendor for details.
*CD-ROM is required for USB driver installation and access to the User's Guide. If no CD-ROM drive is available,
files can be downloaded from the Internet at

WELCOME

Thank you for purchasing a Globalsat USB GPS receiver! Globalsat USB GPS receivers allow for real-time street
navigation by using your laptop for graphical plotting and positioning of your route. Simply load the GPS driver, plug
the GPS receiver into your computer's USB port and install your own personal mapping software to begin to view
your position in real-time in relation to the surrounding streets in your travel area.
You'll find that almost any NMEA compliant mapping/charting software will be compatible with your USB GPS
receiver. Visit our web-site for recommended mapping programs that you can use.
: http://www.usglobalsat.com/
PAGE 3 OF 13
USB GPS (WIN)
rd
party mapping/navigation
USB_GPS_WIN_ v2.1