Removing The Hood From Cabinet - AEG 570 D Operating And Installation Manual

Removing the hood from cabinet

Follow these steps:
• Remove the grease filter.
• Remove the 4 additional screws from the frame.
• Loosen the screws on the two fixing springs. Fig. 9.
• Push a flat screwdriver into the hole for the fixing springs (right and
left) and push each of the fixing springs inwards. Fig. 10.
• At the same time, pull the extractor hood (right and left) out of the
cabinet.
Re-install it as described above.
Fig. 9
Fig. 10
17