Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for AEG 502 D
Summary of Contents for AEG 502 D
- Page 1 502 D Cooker hood Operating and Installation Instructions...
- Page 2 Printed on recycled paper. AEG – putting words into action.
-
Page 3: Table Of Contents
Contents Electrical connections ............4 Safety warnings for electricians ..........4 Appliances with 2 wires ............5 Safety warnings for kitchen unit installer ........ 6 General details ................ 7 Extractor version ..............7 Filter Version ................8 Description of the appliance ..........9 Technical details .............. -
Page 4: Electrical Connections
Electrical connections Safety It must be ensured that the voltage and current indicated on the warnings for rating plate agree with the voltage of the user to electricity supply. electrician If the appliance has been equipped with a mains lead with a moulded-on type plug, the following regulations must be comply with: The plug moulded on to the lead incorporates a fuse. -
Page 5: Appliances With 2 Wires
Electrical connection for the UK The appliance must be connected to fixed wiring with a double Appliances pole switched fused spur outlet with or without pilot lamp. with 2 wires We strongly recommend the appliance to be connected only by a qualified electrician who is a member of the NICEIC who will com- ply with the IEE and any local regulations. -
Page 6: Safety Warnings For Kitchen Unit Installer
Safety When the unit is used in its extractor version, a sufficiently large warnings for ventilation hole must be provided, with dimensions that are kitchen unit approximately the same as the outlet hole. installer The air outlet must not be connected to chimney flues or combus- tion gas ducts. -
Page 7: General Details
The air is ducted out through a pipe which is connected to the outlet hole A (fig. 1) by means of a coupling flange B. To connect the hood to a wall box, you use hoses and wall boxes as offered on the AEG price list as optional extras. -
Page 9: Filter Version
Description of the appliance 1) Light switch 2) Motor switch 3) Work surface lamp 4) Grid Technical details Model 502 D Net weight: 5 kg Height 145 mm Width 520 mm Depth 285 mm Absorbed power: 160W Motor: 1 x 120 W... -
Page 10: Fixing The Hood
Fixing After having adjusted the hood for the version required, it may be installed. the hood This appliance is designed for fitting in a cabinet or some other support. The opening to be made on the bottom of the wall-hung cabinet must correspond with the measurements shown in fig. -
Page 11: Safeting Warnings For User
The hood is fitted with one variable speed motor. Safety warn- The most effective use of the hood is obtained by switching it on ings for user a few minutes before you start cooking and leaving it on a for approximately 5-15 minutes after having finished, thus ensuring that all that cooking odours are eliminated. -
Page 12: Hood Operation
Hood Operation Controls The hood is fitted with a variable speed motor. The most effective use of the hood is obtained by switching it on a few minutes before you start cooking and leaving it on a for approximately 15 minutes after you have finished, thus ensuring all cooking odours are eliminated. -
Page 13: Care And Maintenance
Care and Maintenance Before performing any maintenance operation, disconnect the hood from the electricity. The hood has a metal grease filter. M e t a l grease filter To clean the filter, proceed as follows: Open the grill by turning knob A (fig. 2). Pull the two plastic stops B as shown by the arrows (fig. -
Page 15: Replacing The Lamps
Always turn off the electricity before replacing lamps! Replacing the lamps 1) Remove the grid (Fig. 2) in order to check the lamps and replace them if necessary. 2) Unscrew the lamps that do not work and replace them with 40W max lamps (E14). -
Page 16: Special Accessories
Special accessories See AEG price-list for wallbox and hose accessories. KF-Plus charcoal filter E-Nr. 942 118 620 What to do if If your appliance fails to work properly please carry out the following checks. Symptom Solution The cooker hood will not start... -
Page 17: Service And Spare Parts
Service and spare parts In the event of your appliance requiring service, or if you wish to purchase spare parts, contact your local AEG Service Force Centre by telephoning 08705 929 929 Your call will be automatically routed to the Service Centre covering your post code area. -
Page 18: Guarantee Conditions
Guarantee conditions Guarantee Conditions AEG offer the following guarantee to the first purchaser of this appliance. 1. The guarantee is valid for 12 months commencing when the appliance is handed over to the first retail purchaser, which must be verified by purchase invoice or similar documentation.The guarantee does not cover commercial... - Page 19 Before you move please contact your nearest Customer Care Centre, listed below, to give them details of your new home.They will then ensure that the local Service Organisation is aware of your move and able to look after you and your appliances. France Senlis +33 (0) 3 44 62 29 29...
- Page 20 AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.de © Copyright by AEG LI1ZDA Ed. 05/02...