Temperature Display; Prior To Initial Start-Up; Starting Up And Temperature Regulation - AEG ARCTIS Operating Instructions Manual

DESIRED temperature means:
The temperature that is required in the freezer, this can be adjusted to
the temperatures shown in the display. The DESIRED temperature is
indicated by a flashing light.
ACTUAL temperature means:
The temperature display indicates the temperature that is currently
present in the freezer. The ACTUAL temperature is indicated by a con-
tinuously illuminated light.

Temperature Display

• During normal operation, the temperature currently present in the
freezer (ACTUAL temperature) is displayed, the corresponding light
illuminates.
• If the temperature in the freezer is warmer than the display range of
the temperature display, the red warning light flashes and all the
lights in the temperature display are extinguished.
• When the temperature is being adjusted, the temperature currently
set flashes (DESIRED temperature).
Prior to Initial Start–Up
Please clean the appliance interior and all accessories prior to initial
start-up (see section: "Cleaning and Care").

Starting up and temperature regulation

1. Insert the plug into the plug socket.
2. Press ON/OFF button. The green mains pilot indicator illuminates. A
warning tone sounds and the flashing red warning light indicates that
the required storage temperature has not yet been reached.
3. Press either the „+" (WARMER) or „-" (COLDER) button. The tempera-
ture display switches over and the DESIRED temperature currently set
flashes on the temperature display.
The temperature display can indicate several pieces
of information.
57