Hoses; Diffuser Cap Assembly - RIDGID WD55000 Owner's Manual

SP6755 RIDGID 5 Gallon
Accessories (cont.)

Hoses

(14 Foot Tug-A-Long & 7 Foot
Super Flex)
The 14 Foot Tug-A-Long Hose and the
7 Foot Super Flex Hose have an adaptor
that can be used to connect the hose to
the vacuum port on the Vac or to the
male end of another hose. Both 7 foot
and 14 foot hoses can be used
connected together or independently from
one another.
Both the 7 foot and 14 foot hoses have a
locking adaptor at one end that will
connect to the Vac, and a friction fit
at the other end, which will connect to all
the 1-7/8 inch accessories or a second
hose.
To connect these two hoses together, first
connect the 14 foot hose to the wet/dry
Vac. Next connect the 7 foot hose to the
14 foot hose by inserting the friction end
of the longer hose into the larger locking
end of the shorter hose. This will create a
friction connection.
Vacuum Inlet Port
Friction
End
Vacuum Inlet
Port
2/11/10 10:10 AM
Male End
of Hose
Tug-A-Long
Hose
Page 12

Diffuser Cap Assembly

Connect the lanyard to the attachment
tab on the Vac motor assembly to keep
the diffuser attached to Vac when using
the blower port. The diffuser cap can be
used in the exhaust port of the Wet/Dry
Vac. Installing the diffuser cap will allow
you to diffuse the exhaust air in any
direction and reduce the intensity of the
exhaust force.
Attachment Tab
Lanyard
Diffuser
12