Page 5
Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications. CIDD18V2_010099002_SAA_D3.indd A5 CIDD18V2_010099002_SAA_D3.indd A5 10/25/2010 12:10:18 PM 10/25/2010 12:10:18 PM...
English GENERAL POWER TOOL SAFETY WARNINGS 3. PERSONAL SAFETY a. Stay alert, watch what you are doing and use common sense when operating a power tool. WARNING Do not use a power tool while you are tired or Read all safety warnings and all instructions. under the influence of drugs, alcohol or medi- Failure to follow the warnings and instructions may result cation.
BPL-1815 BCL1418 c. When battery pack is not in use, keep it away from other metal objects, like paper clips, BCL-1800 CIDD18V2 ABP1801 coins, keys, nails, screws or other small metal BCL1418 ABP-1815 objects, that can make a connection from one BCS618 terminal to another.
Page 8
Hammer drilling in concrete, brick, or other masonry ■ SWITCH TRIGGER See Figure 3. This product will accept RYOBI One+ 18 V lithium-ion To turn the drill ON, depress the switch trigger. ■ battery packs and RYOBI One+ 18 V nickel-cadmium To turn it OFF, release the switch trigger.
Page 9
English INTERNAL SPINDLE LOCK QUICK MODE SELECTOR The internal spindle lock allows the user single-handed See Figure 6. control of chuck adjustments and bit changes. Squeezing The Quick Mode Selector allows you to quickly switch the chuck body stops the chuck jaws from turning. For from drill mode to drive mode.
Page 10
English 1. APPLICATION 2. SPEED 3. MODE • Lag screws up to 9.5 mm dia. by 38.1 mm long 1/LOW DRILL MODE • Hole saw up to 50.8 mm (TORQUE ADJUSMENT NOT ACTIVE) • Spade bits up to 38.1 mm •...
Volts MAINTENANCE Revolutions or reciprocations per minute Direct current WARNING When servicing, use only identical RYOBI Please read the instructions carefully before replacement parts. Use of any other parts may create a hazard or cause product damage. starting the machine.