What To Do If - AEG 6100 M-IN Installation And Operating Instructions Manual

What to do if ...

Problem
The cooking zones are not
functioning.
The residual heat indicator
is not displaying anything
If you are unable to remedy the problem by following the above
suggestions, please contact your local Service Force Centre.
1
Warning! Repairs to the appliance are only to be carried out by quali-
fied service engineers. Considerable danger to the user may result from
improper repairs.
3
If the appliance has been wrongly operated, the visit from the service
technician or dealer may not take place free of charge, even during the
warranty period.
Possible cause
The desired heat setting is
not set.
The fuse in the house's
electrical wiring (fuse box)
has been tripped.
The cooking zone was only
on for a short time and is
therefore not hot
Remedy
Set the heat setting.
Check the fuse.
If the fuses trip a number
of times, please call an au-
thorised electrician.
If the cooking zone is sup-
posed to be hot, call your
local Service Force Centre.
9