Care And Cleaning; What To Do If - AEG HK834060XB User Manual

12

Care and cleaning

Information on acrylamides
Important! According to the newest scientific knowledge, if you brown food (specially
the one which contains starch), acrylamides can pose a health risk. Thus, we recommend
that you cook at the lowest temperatures and do not brown food too much.
CARE AND CLEANING
Clean the appliance after each use.
Always use cookware with clean bottom.
WARNING!
The sharp objects and abrasive cleaning agents can cause damage to the appliance.
For your safety, do not clean the appliance with steam cleaners or high-pressure cleaners.
Scratches or dark stains on the glass-ceramic cause no effect on how the appliance oper-
ates.
To remove the dirt:
1. – Remove immediately: melted plastic, plastic foil, and food with sugar. If not, the
dirt can cause damage to the appliance. Use a special scraper for the glass . Put
the scraper on the glass surface at an acute angle and move the blade on the surface .
– Remove after the appliance is sufficiently cool: limescale rings , water rings, fat
stains, shiny metallic discolorations. Use a special cleaning agent for glass ceramic
or stainless steel.
2. Clean the appliance with a moist cloth and some detergent.
3. At the end rub the appliance dry with a clean cloth.

WHAT TO DO IF...

Problem
You cannot activate the appli-
ance or operate it.
The residual heat indicator
does not come on.
Possible cause and remedy
• You touched 2 or more sensor fields at the same time. Only
touch one sensor field.
• There is water or fat stains on the control panel. Clean the
control panel
• The lock or child safety device operates
tion. See the section "Locking/unlocking the control panel"
and "Child safety device".
• The STOP+GO function operates
the section "Starting the STOP+GO".
• Start the appliance again and set the heat setting in 10 sec-
onds.
The cooking zone is not hot because it operated only for a
short time. If the cooking zone must be hot, speak to the serv-
ice centre.
. Stop the func-
. Stop the function. See