Adjusting Gate Traveling Distance; Timer Adjustment - Chamberlain ELITE R900 Instruction Manual

A D J U S T I N G
Release the red handle and open the gate to a distance desired. Loosen the screw. Turn limit cam
until the half moon shape hits the limit switch and you hear the switch click. For closing cycle, do
the same with the other limit cam. For a more precise adjustment, use the set allen screw.
Limit
Switches
If you want to use the automatic close for the gate system the timer switch should be put in
the "ON" position. If you want to use the push open or push close command, the timer
should be switched to the "OFF" position.
Set Timer
0 to 60 seconds
G A T E T R A V E L I N G
Limit Cams
Adjust
Limit
Cams
Loosen Screw
A D J U S T A B L E
19
D I S T A N C E
T I M E R
Allen Screw