Table of Contents
Advertisement
using advanced functions
SETTING THE TIMER
This advanced Timer function allows you to turn on/off your air conditioner automatically even when you are
away. Simply set the time and your air conditioner will turn on/off automatically.
On timer
This function allows you to turn on the air conditioner
automatically within the time range of
24 hours. On timer is available while your air
conditioner is on/off.
1. Press the On Timer button on the remote control.
On timer indicator blinks on the remote control display.
2. Set the time you want the air conditioner to turn on automatically.
Press the Time or button on the remote control
to change the time setting while On timer indicator
is blinking. You can set the time up to 24 hours,
increasing in 30 minute unit up to first 3 hours and in
hourly unit after first 3 hours.
3. Press the Set/Cancel button on the remote control to
active it on.
The remote control display will show the hour(s) you
have set.
The air conditioner will operate automatically at set time and then On timer indicator
disappears. If On timer is not set within 10 seconds, the air conditioner will end setting.
4. Set the operating mode.
Press the Mode button on the remote control until the
desired mode appears on the remote control display.
The air conditioner will operate in the mode you set.
On timer function is available in Auto/Cool/Dry/Fan/
Heat mode.
• Temperature can also be adjusted. (See step 3 on page 15 for instructions.)
• After the set up while the unit is off, approximately after 10 seconds, all the other
indicators will be gone except the On timer indicator and remaining time.
• Setting time allows you to change by pressing the On Timer button. Press the Time
or button to change time setting and then press the Set/Cancel button to active it on.
20_ using advanced functions
FJM CONSOLE_IB_E_29318A_11.26.08.indd 20
�������
�������
�������
�������
2008-11-26 14:34:00
Advertisement
Table of Contents
