Heat - Samsung MH FJEA series User Manual

operating basic function
SELECTING OPERATION MODE

Heat

The air conditioner heats as well as cools. Warm your room with this versatile appliance in the
cold of winter.
1. Turn on the air conditioner.
Press the Power
2. Set the operating mode.
Press the Mode button on the remote control until
Heat mode indicator appears on the remote control
display.
The air conditioner operates in Heat mode and warms
your room.
When you press the Mode button, mode will change
in order of Auto, Cool, Dry, Fan and Heat.
3. Set the temperature.
Press the Temp or  button on the remote control
to decrease or increase the desired temperature.
You can set the desired temperature between
the range of 16˚C~30˚C.
You can decrease/increase the temperature by 1˚C.
4. Set the fan speed.
Press the Fan  or  button on the remote control to
set the desired fan speed.
If room temperature reaches desired value, heating will
stop for a while.
• When you press the Fan  or  button, fan speed
will change in order of Auto, Low, Medium and
High.
• Fan may not operate for about 3~5 minutes at the
beginning to prevent any cold blasts while the air
conditioner is warming up.
• Air flow can be adjusted manually. (See page 19 for instructions.)
• Since the air conditioner heats the room by taking heat energy from outdoor air, the
heating capacity may decrease when outdoor temperatures are extremely low. If you feel
the air conditioner insufficiently heats, using an additional heating appliance in combination
with the air conditioner is recommended.
18_ operating
FJM CONSOLE_IB_E_29318A_11.26.08.indd 18
button on the remote control.
�������
�������
�������
�������
�������
�������
2008-11-26 14:33:51