Electrical Connection; Prior To Initial Start-Up; Operating And Indicator Panel - AEG ARCTIS 65240 GA User Manual

Aeg freezer
Hide thumbs Also See for ARCTIS 65240 GA:
Table of Contents

Advertisement

Available languages

Available languages

Electrical connection

Before initial start-up, refer to the appliance rating plate to ascertain if sup-
ply voltage and current values correspond with those of the mains at the
installation location.
e.g.:
(i.e. 230 to 240 volts alternating current, 50 Hertz)
The rating plate is inside the appliance on the left.
A correctly installed, earthed socket is required for the electrical supply. The
supply must have a fuse rating of at least 10 Amps.
If the socket is not accessible once the appliance is built in, the electrical
installation must include suitable means of isolating the appliance from the
mains (e.g. fuse, cut-out, current trip or similar with a minimum contact
separation of 3 mm).
Attention: The mains connection cable may only be replaced by a skilled
electrician. Please contact your dealer or our customer service department
for repairs.
Prior to Initial Start–Up
• Please clean the appliance interior and all accessories prior to initial start-
up (see section: "Cleaning and Care").

Operating and indicator panel

A
Alarm light (red)
B
Fast feezing light (yellow)
C
Fast feezing (FROSTMATIC) switch/reset sound alarm signal
D
Operating light (green)
E
Temperature regulator knob
The temperature regulator (E) can be used for the variable setting of the sto-
rage temperature for your frozen food.
AC
230 ... 240 V
230 ... 240 V~
50 Hz
50 Hz or
63

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents