Electrolux EDC 5349 Instruction Booklet page 10

125980820 gb.qxp 2005-01-04
when the programme selector dial is turned
●
to another position during the programme or
when you press an option button during the
cycle
at the end of the programme
●
when the water reservoir is full
●
if the machine is not working correctly
●
when the small door at the bottom is open.
●
By selecting this option, pressing "Wijzigen"
button, the acoustic signal is switched off:
at the end of the programme
●
when the water reservoir is full
●
if the machine is not working correctly
●
when the small door at the bottom is open.
●
To confirm this option press "Terug" button.
Set Up menu:
Menu option is used for selecting various basic
settings without affecting the particular drying
programme. These basic settings will remain
active until they are deselected/modified.
To move through the different Menu settings use
the "Opties" button. To change/confirm the
selected setting use the "Wijzigen" button.
Memory
Programme settings that are frequently used can
be saved. There are 2 memory spaces available
for this purpose. The saved programme can be
selected in the same way as any other drying
programme by means of the selector dial.
Example: Cotton Extra Dry, 1200 rpm, No
Buzzer and Dry Level option).
1. Select the cycle and programme settings.
2. Enter the Menu option and select one of the
memory positions. «Store programme?»
message will appear in the display.
12:59 Page 10
3. To memorise the selected programme press
the "Wijzigen" button. «Stored» message
will appear in the display.
To change the memorised programme setting
repeat the procedure from the beginning.
Sound
The sound setting permits you to modify the
volume of the sound emitter. You can choose
between different levels: low, no sound and
normal.
Example:
1. Enter the Menu option and select the sound
setting.
2. Use the "Wijzigen" button to select the
desired level.
10