Condenser; Your Tumble Dryer Is Not Working; Service And Spare Parts - Electrolux EDC 503 M Instruction Booklet

YOUR TUMBLE DRYER IS NOT WORKING

TYPE OF FAILURE
The tumble dryer does not start.
Drying takes too long or laundry is not
dry enough.
Space surrounding the appliance is
overheating.

SERVICE AND SPARE PARTS

Should there be a failure of any kind, please consult
the 'Your tumble dryer is not working....' chapter in
order to see whether you can rectify the fault yourself.
Technical assistance and spare parts are available at
Electrolux Service Centres or Authorised Dealers.
Technical assistance is subject to the relevant laws and
regulations.
Please keep your guarantee card and receipt.
When contacting an Electrolux Service Centre or
Authorised Dealer, you will have to state the tumble
dryer's product number, model number and serial
number, which are on the rating plate.
POSSIBLE CAUSE
The door has not been closed properly.
No electrical supply.
Drying time selector dial in incorrect position.
Water container is full.
Start button has not been pressed.
Laundry has not been spun properly.
Filter is clogged up.
Condenser is clogged up.
Has the 'low temperature' function been selected?
Room temperature is too high.
Has the correct programme/drying time been chosen?
There is too much laundry inside the appliance.
Water container is full.
Room in which appliance has been installed is too
small or ventilation is insufficient. Open door/windows
or move tumble dryer.
This plate is located in the lower part of the
appliance.
Model: _____________________________________
Serial number: _______________________________
Product number: ______________________________
Date of purchase: _____________________________
23