The removable seat fabric can be machine-washed using cold water. The canopy fabric can be spot cleaned. DO NOT machine-dry the fabric. The weight capacity of this stroller is 45 lbs. As part of continuous product development, Bumbleride reserves the right to make design changes without notice or obligation. Bumbleride...
All costs associated with shipping and handling are the responsibility of the customer. Upon receipt of the product, Bumbleride or its authorized repair center, will arrange for inspection of the item. If the problem is due to defective parts or defective workmanship on behalf of Bumbleride, Bumbleride will repair or replace the product at Bumbleride’s option.
9 Folding Your Stroller 10 Stroller Diagram BOX CONTENTS CUP HOLDER WHEELS (4) WHEELS (4) WHEELS (4) BUMPER BAR BUMPER BAR BUMPER BAR BUMPER BAR BUMPER BAR RAIN COVER CHASSIS WITH SEAT FABRIC CHASSIS WITH SEAT FABRIC CANOPY CANOPY Bumbleride Bumbleride 1.800.530.3930 info@bumbleride.com...
Page 6
To remove the canopy, squeeze the clips on both ends and pull. Insert front bumper into plastic holders on either side of the seat. To remove the bumper bar, press the clips on each side of the bar and pull out. Bumbleride 1.800.530.3930 info@bumbleride.com...
Page 7
Carefully adjust the harness straps to snugly t your child by adjusting the sliders located on the shoulder straps, waist straps and the central front strap. To open the harness, squeeze the buckle prongs and pull away from the buckle housing [C]. WARNING: ALWAYS USE SAFETY HARNESS WHEN CHILD IS SEATED IN THE STROLLER. www.bumbleride.com | 6...
Page 8
To raise, simply push the backrest up until it engages in the desired position [2]. Press the handle buttons on either end of the handle simultaneously and lower or raise the handle height [3]. Bumbleride 1.800.530.3930 info@bumbleride.com...
ATTACHING ACCESSORY RAIN COVER Begin by unfolding the packaged rain cover and placing it over your Bumbleride. Pull the upper ap through the handle opening. Notice the Velcro attachments on both sides of the ap. Secure the Velcro attachments found on the upper ap to the corresponding attachments on the side walls of the rain cover. Secure the Velcro loops around the front portion of the frame.
Frotter les taches de la capote si nécessaire. Ne pas passer au sèche-linge. La charge maximale de cette poussette est de 18 kg (40 livres). Dans le cadre du développement continu du produit, Bumbleride se réserve le droit d’apporter des modifications de conception sans préavis ou obligation Norme de sécurité...
Bumbleride. Toutes les revendications de garantie doivent être envoyées à votre détaillant autorisé. C'est la responsabilité du client de payer pour expédier des prix. Quand l'article arrive, Bumbleride prendra des dispositions pour ce que l'article est reconsidéré.
Page 14
Installation d’une la couverture LA COUVERTURE CAPOTE Bumbleride 13 | 1.800.530.3930 info@bumbleride.com...
Page 16
Insérer chaque extrémité de la capote dans les supports en plastique situés de chaque côté du cadre [6]. Fixer la capote à l’aide des boutons-pression. Pour l’ôter, appuyer sur les clips en plastique aux deux extrémités et tirer. Bumbleride 15 | 1.800.530.3930 info@bumbleride.com...
Page 20
INSTALLATION D’UNE LA COUVERTURE Commencer en dépliant la couverture et couvrir votre Bumbleride. Tirer le rabat supérieur par la poignée. Il y a des attachements de Velcro de côté et d'autre. Connecter les attachements des rabats aux attachements sur les murs latéraux. Obtenir les boucles de Velcro au devant du châssis.
Page 24
The removable seat fabric can be machine-washed using cold water. The canopy fabric can be spot cleaned. DO NOT machine-dry the fabric. The weight capacity of this stroller is 45 lbs. As part of continuous product development, Bumbleride reserves the right to make design changes without notice or obligation. Bumbleride...