Removing / Replacing Drain Handle; Emoving Eplacing Mpeller; R Eference - European Touch FORTE SPA Owner's Manual

Tools required:
Phillips head screwdriver
Check your state and local regulations for cleaning procedures. Links to your state boards can be found on
our web site, at www.europeantouch.com. Refer to the cleaning procedure page headed "Clean Touch™
®
Pipe-Free Spa - Cleaning and Disinfecting Procedures," page 18, for cleaning recommendations.
Follow the steps below for cleaning and replacing parts:
Step 1: To remove the chrome handle pull it
forward. If difficult to remove, gently pry
it off with the screwdriver.
Step 2: To remove the handle adapter, place
Phillips head screwdriver into upper slot
to reach screw, as shown in picture
above. Unscrew and then pull adapter
forward.
Check your state and local regulations for cleaning procedures. Links to your state boards can be found on
our web site, at www.europeantouch.com. Refer to the cleaning procedure page headed "Clean Touch™
®
Pipe-Free Spa - Cleaning and Disinfecting Procedures," page 18 for cleaning recommendations.
Follow the steps below for cleaning and replacing parts:
1. Remove the Clean Touch
Assembly by turning it
clockwise
Document ID: 40080001
R / R
EMOVING EPLACING
R / R
EMOVING
2. Remove Clean Touch inlet
cover from housing by twisting
counter-clockwise.
Rev: F
D H
RAIN
Step 3: Adapter and Chrome Handle removed,
shown for cleaning reference.
Step 4: Drain Plunger removed, shown for
cleaning reference.
I
EPLACING MPELLER
3. Remove the impeller by lifting from the
basin.
4. Once the parts are clean, complete
steps one through three in reverse
order.
Technical Support: 800-626-6912
ANDLE
Page 21 of 24