Related Manuals for European Touch FORTE SPA
Summary of Contents for European Touch FORTE SPA
- Page 1 The World's Finest Pedicure Spas ’ WNER ANUAL ORTE & LTERA ® LEAN TOUCH ™ Document ID: 40080001 Rev: F Technical Support: 800-626-6912 Page 1 of 24...
-
Page 2: European Touch - Limited Conditional Warranty
If examination of the Pedicure Spa by European Touch during the applicable warranty period shows it to have a defect in material or workmanship, European Touch will, at its option, repair or replace the defective component or part thereof. Further, European Touch may, at its discretion, replace a defective component or part with a refurbished component or part, or may replace the Pedicure Spa with a refurbished pedicure spa. - Page 3 • This warranty is limited to the original owner/end-user and is non-transferable. • European Touch shall not be liable for any other obligations or liabilities, including, but not limited to: obligations or liabilities arising out of breach of contract or warranty, negligence, or other tort or...
- Page 4 IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED AND EXCLUDED FROM THIS LIMITED WARRANTY. NO DEALER OR OTHER PERSON HAS ANY AUTHORITY TO BIND EUROPEAN TOUCH TO CHANGES OR ADDITIONS TO THIS WARRANTY. ACCORDINGLY, EUROPEAN TOUCH IS NOT RESPONSIBLE FOR ANY SUCH CHANGES OR ADDITIONS.
-
Page 5: Certificate Of Compliance
Certificate of Compliance European Touch 8301 W. Parkland Court Milwaukee, WI U.S.A. 53223 For Compliance of: Equipment: Whirlpool Pedicure Spa Model No.: SOLACE – PF & SOLACE – PF PDP Rated: 220-240VAC, 50Hz, 7.5A To the following standard(s): EN60335-1:2002 EN60335-2-32:2002... -
Page 6: Important Information
OWNERS MANUAL For Whirlpool Pedicure Spa Models: ORTE LTERA MPORTANT NFORMATION Serial Number: Work Order Number: Installed by: Installation Date: Serial Number W/O Number Note: Vietnamese and Korean translations available upon request. Document ID: 40080001 Rev: F Technical Support: 800-626-6912 Page 6 of 24... -
Page 7: Table Of Contents
ABLE OF ONTENTS European Touch - Limited Conditional Warranty................2 Certificate of Compliance........................5 ........................6 MPORTANT NFORMATION ............................8 NTRODUCTION ........................8 MPORTANT EQUIREMENTS ..............................9 ANGER ............................. 9 ARNINGS ....................10 NSTALLATION PECIFICATIONS UMMARY ................11 MPORTANT NSTALLATION AND... -
Page 8: Introduction
MPORTANT EQUIREMENTS EUROPEAN TOUCH requires that you contact a local, licensed plumber and licensed electrician to install your new pedicure spa. Installation must be in compliance with all your local and state building codes. Your pedicure spa cannot operate efficiently or safely unless it is provided with adequate electrical power, sufficient water pressure, proper water temperature, and required drainage capabilities. -
Page 9: Danger
ANGER Never use pins or other metallic fasteners with this appliance. Carefully examine the covering before each use. Discard the appliance if the covering shows any sign of deterioration, such as checking, blistering, or cracking. Keep Dry – Do not operate in a wet or moist condition. ARNINGS 1) WARNING: RISK OF ELECTRIC SHOCK;... -
Page 10: Installation Specifications Summary
NSTALLATION PECIFICATIONS UMMARY Note: Failure to comply with federal, state or local codes and ordinances will result in the warranty being null and void. As stated, the pedicure spa installation must comply with all plumbing and electrical codes. A licensed plumber and licensed electrician must complete the applicable connections of the pedicure spa. -
Page 11: Important Installation And Utility Information
MPORTANT NSTALLATION AND TILITY NFORMATION Electrical Service: 110V: A 110V, 60 Hz, 15 Amp GFCI protected grounded circuit must be used to supply power to the pedicure spa. (220V if ordered in 220V configuration) 220V: A 220-240VAC, 50Hz, 7.5 Amp GFCI protected grounded circuit must be used to supply power to the pedicure spa per local code. -
Page 12: Dimensional Drawings
IMENSIONAL RAWINGS ™ P ® LEAN OUCH Document ID: 40080001 Rev: F Technical Support: 800-626-6912 Page 12 of 24... - Page 13 ™ P ® LEAN OUCH Document ID: 40080001 Rev: F Technical Support: 800-626-6912 Page 13 of 24...
-
Page 14: Specifications
PECIFICATIONS Hot and cold water supply lines required (hot and cold shut off valves may be installed under pedicure spa base) See pages nine through eleven. Drain installation: References noted on pages nine through eleven, can be installed with optional power drain pump or as gravity drain. -
Page 15: Attaching The Seat Back
TTACHING THE Your pedicure spa shipped with the seat bottom and seat back already attached to the base. Follow these instructions to connect the seat back to the pedicure spa: Forte Altera Step 1: Remove the hitch and clevis pins located Step 1: Remove the hitch and clevis pins located on the seat back mounting bracket on the back of on the seat back mounting bracket on the back of... -
Page 16: Unpacking The Cushions
Altera Vibration Massage Only: The remote and junction box Please make sure that all parts are removed from the box before discarding the box. If any parts are missing, the customer must contact EUROPEAN TOUCH within 30 days of the delivery date for replacement at 800- 626-6912. -
Page 17: Ttaching The Ushions
TTACHING THE USHIONS All pedicure spa cushions attach to the pedicure spa with Velcro. The Forte and Altera Pedicure spas have cables for the cushions that need to be routed properly. Follow these instructions for attaching the cushions properly to your pedicure spa: Step 1: Your pedicure spa will Step 4: Remove the protective film Step 7:... -
Page 18: Component Reference
• It has been determined that products containing non-dissolving abrasives (such as sand and sea salts) will not harm the internal component structure of your pedicure spa as long as the entire EUROPEAN TOUCH cleaning requirements are followed without deviation. -
Page 19: Clean Touch Pipe -Free Spa - Operating Instructions
™ ® LEAN OUCH PERATING NSTRUCTIONS Preparing the Pedicure Spa for Operation: After the pedicure spa is installed and the plumbing and electrical connections are made, clean and disinfect the basin before initial use. Rinse the basin by using the attached water sprayer. Wipe the basin dry with a clean towel. -
Page 20: Clean Touch ™ Pipe -Free ® Spa Cleaning And Disinfecting Procedures
® ™ P LEAN OUCH LEANING AND ISINFECTING ROCEDURES Always check with your state board for required cleaning and disinfecting procedures. It is extremely important to clean and disinfect your pedicure spa after each pedicure, after the last pedicure of the day, and once a week for overnight cleaning. -
Page 21: Removing / Replacing Drain Handle
EMOVING EPLACING RAIN ANDLE Tools required: Phillips head screwdriver Check your state and local regulations for cleaning procedures. Links to your state boards can be found on our web site, at www.europeantouch.com. Refer to the cleaning procedure page headed “Clean Touch™ ®... -
Page 22: History And Notes
ISTORY AND OTES Document ID: 40080001 Rev: F Technical Support: 800-626-6912 Page 22 of 24... - Page 23 ISTORY AND OTES Document ID: 40080001 Rev: F Technical Support: 800-626-6912 Page 23 of 24...
- Page 24 EUROPEAN TOUCH 8301 W. Parkland Court Milwaukee, WI 53223 Phone Number: 1-414-357-7016 Toll Free: 1- 800-626-6912 Fax: 1- 414-357-6360 Web Site: www.europeantouch.com...