Registering Additional Handsets - BT STUDIO 4100 User Manual

Registering additional
handsets
You can use up to five BT Studio 4100 handsets with your BT
Studio 4100 base to extend your phone system without needing
to install extension sockets for each new phone.
If you have purchased a BT Studio 4100 multiple pack any
additional handsets come pre-registered to the base.
If you have purchased an additional handset separately you must
register it to your BT Studio 4100 base before it can be used.
Registering a handset
1. Press the button then
is displayed, then press
is displayed. Enter the base PIN (original setting 0000)
2.
Pin?
and press .
3. The handset will display
button on the base until you hear a long beep and the green
In use light begins to flash.
4. The handset will temporarily display
display and will be automatically assigned the next
hanDSeT
handset number.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
or until
regiSTraTiOn
.
, press and hold the
Searching
regiSTereD
If registration is not successful first
time, please repeat the process again
in case the base registration period
ran out of time.
If there are already 5 handsets
registered to the base, the
registration will fail. You must
then will
de-register (delete) another handset
before you can register the new one.
See page 28, "Delete handset"
for instructions.
33