BT SYNERGY 1000 User Manual page 19

To adjust the handset ringer volume
The handset ringer can be set to
button until display shows SET UP.
• Press the
button. Display shows HANDSET.
• Press the
button. Display shows KEYTONES.
• Press the
• Press the button until the display shows
RING VOL.
• Press the button. Display shows the current
setting HI (or LOW).
• Press the to change the setting. Display
shows LOW (or HI).
• Press the button. A beep confirms that the
change has been made.
To adjust the handset ringer melody
You can select from six different ringer
melodies.
• Press the button until the display shows
SET UP.
button. Display shows HANDSET.
• Press the
button. Display shows KEYTONES.
• Press the
• Press the button until the display shows
MELODIES.
• Press the button. Display shows the
current setting A (or B, C, D, E, F). The
displayed setting is played.
• Press the to change the setting. Display
shows the next melody option. The melody is
played.
• Press the button when you want to select
a melody. A beep confirms that the change
has been made.
14
If more than one handset is registered to the
or .
HI LOW
base it can be useful to select different melodies
for each handset.
To adjust the ringer volume in the base
station
You can switch between
• Press the
SET UP.
• Press the
• Press the
• Press the
PIN.
• Press the
RING VOL.
• Press the
the current setting HI (or LOW, OFF).
• Press the
shows the next option and the ringer sounds.
• Press the
change has been made.
, and
HI LOW
button until the display shows
button. Display shows HANDSET.
button. Display shows BASE.
button. Display shows SECURITY
button until the display shows
button. Display shows and plays
to change the setting. Display
button. A beep confirms that the
.
OFF