Important Safety Requirements - AEG 69802 G Operating Instructions Manual

TYPE OF GAS
NOMINAL THERMAL
POWER
NATURAL GAS
NOMINAL FLOW
20 mbar
VALUE = RATE
37.78 MJ/m
3
NOZZLE REFERENCE
Ws - 50.7 MJ/ m
3
NOMINAL THERMAL
LPG GAS
POWER
28-30/37 mbar
NOMINAL FLOW
VALUE =
RATE
49.92 MJ/Kg
NOZZLE REFERENCE

Important safety requirements

This hob must be installed in accordance with the Gas Safety (Installation and
Use) Regulations (Current Edition) and the IEE Wiring Regulations (Current Edition).
For appliances installed in the Republic of Ireland please refer to NSAI- Domestic
Gas Installation I.S. 813 Current Editions and the ETCI Rules for Electrical
Installations.
Detailed recommendations are contained in the following British Standards Codes
Of Practice: B.S. 6172/ B.S. 5440, Par. 2 and B.S. 6891 Current Editions.
Provision for ventilation
The hob should not be installed in a bed sitting room with a volume of less than 20
m . If it is installed in a room of volume less than 5 m
3
110 cm is required. If it is installed in a room of volume between 5 m
2
air vent of effective area of 50 cm
air is required.
However, if the room has a door which opens directly to the outside no air vent is
required even if the volume is between 5 m
If there are other fuel burning appliances in the same room, B.S. 5440 Part 2
Current Edition, should be consulted to determine the requisite air vent
requirements.
For appliances installed in the Republic of Ireland please refer to the NSAI-
Domestic Gas Installation I.S. 813 Current Editions Table Four.
BURNER
POSITION
kW
m /h
3
1/100 mm
kW
g/h
1/100 mm
2
RAPID SEMI-RAPID
(large)
MAX MIN MAX
2 . 9 0.75 1 . 9
0.276 0.062 0.181
119 Adjust. 96
2 . 7 0.75 1 . 9
195 46.8 137
86 40 71
an air vent of effective area of
3
is required, while if the volume exceeds 11 m
and 11 m
3
Instructions for the Installer
AUXILIARY
(medium) (small)
MIN MAX
0.45 1 . 0
0.043 0.095
Adjust. 70
0.45 1 . 0
32.4 72
32 50
and 10 m
3
.
3
MIN
0.33
0.031
Adjust.
0.33
23.8
28
an
3
no
3
11