Set The Day And Time - BT Freestyle 2500 User Manual

5301 BT Freestyle 2500 UG [5]
2. Insert the 2 x AAA NiMH batteries supplied into the
handset. Slide the battery compartment cover into place.
3. Charge the handset for at least 16 hours by placing the
handset on the base. The red Charging light comes on.
The handset is pre-registered to the base as
This is shown on the display. When the handset is fully
charged the display shows the
4. After 16 hours, plug the telephone line cord into your
BT Freestyle 2500 base and the telephone wall socket.

Set the day and time

Your BT Freestyle 2500 answering machine automatically
adds the day and time to all messages and memos
recorded. The default setting is Saturday 12:01pm.
All manuals and user guides at all-guides.com
22/1/04 8:41 am
BT Freestyle 2500 – Edition 05 – 12.12.03 – 53011
HS 1
symbol.
Page 7
The red Charging light stays on
even when the batteries are full
charged.
Talk/Standby time
Under ideal conditions, fully
charged handset batteries should
give about 10 hours talktime or
100 hours standby on a single
charge.
Battery low warning
If the
will need to recharge your handset
before using it.
.
Battery performance
To keep your batteries in the best
condition, leave the handset off
the base for a few hours at a time
(after the initial 16 hour charge).
New NiMH batteries do not reach
full capacity until they have been in
normal use for several days
Running the batteries right down
at least once a week will help them
last as long as possible.
The charge capacity of
rechargeable batteries will reduce
with time as they wear out, so
reducing the talk/standby time of
the handset. Eventually they will
need to be replaced. New batteries
can be obtained from the BT
Freestyle Helpline 0870 240 3962.
Getting started
symbol is flashing, you
7