BT FREESTYLE 120 PLUS User Manual page 9

In the event of a power failure, the batteries will
give you up to one hour talk time or seven hours
on standby.
4 Plug the power cable into the
back of the base unit
12V AC
RINGER
HI LO OFF
Plug the mains power cable into the socket
on the back of your Freestyle 120 Plus.
T-TB T-E P-E
LINE
TEL MODE
Warning
Do not try to use any power supply other
1
than the one provided. This may
permanently damage your Freestyle 120 Plus.
Your Freestyle 120 Plus should not be fitted
2
in wet or damp conditions, for example in a
bathroom. Also, the handset should not be
left out in the rain.
There is a slight chance that your phone
3
could be damaged by an electrical storm.
We recommend that you unplug the base
unit from the mains during storms.
5 Connect the base unit
three-pin adaptor to a power
socket
Like all cordless phones, your Freestyle 120 Plus
handset will need charging for 24 hours before use.
6 Plug the phone into the BT
socket
You can now use the telephone and store
numbers in the memory.
Setting up
7