Advertisement
Press the
navigation
button to display the list of
internal handsets registered
to the base.
Press the
or
navigation button to select the
handset you want to de-register.
Press the
options button.
Press the
navigation
button until the display shows
Press the
options button.
Enter the base station PIN
(original setting =
Press the
options button.
Display shows
Press the
options button
to confirm de-registration.
Press the
to return to the idle screen.
When the batteries are almost flat a
beep sounds and the display shows the
empty battery icon. You will need to
recharge your handset before you can
use it. The various states of charge
are shown below:
.
If you go out of range of a base station
).
for a long time while your handset is
switched ON, it may take more than
20 minutes to 'find' the base station
again when you come back within
range. However, by simply switching
the handset OFF for a moment, then
ON again, it will find the base station
within a few seconds.
button
Batteries fully charged
Batteries at 66%
Batteries at 33%
Batteries empty
13
Advertisement
