BT CALLER DISPLAY 2000 User Manual page 10

To set the
temperature
reading to C
or F
Your Caller Display
2000 can tell you
the current
temperature indoors
or outdoors. For
outside temperature
you need to attach
the External
Thermometer lead
and place the end
outside.
Press the
1 CLEAR
button until the
display shows the
temperature.
Clear
Press the
2
DIAL
button to switch
between C and F.
Dial
Switch between the
3
inside and outside
temperature using
the
IN/OUT
(on the back of
your CD 2000).
8
To wall-mount
Your Caller Display
2000 can be wall
mounted using the
wall-mounting
bracket, screws and
wall plugs provided.
Lead length
– the position you
choose should
leave enough
length of cable to
plug into line and
power sockets at
ground level.
Wall mounted
Hold wall bracket
1
against the wall
switch
ensuring it is level.
Then, with a pencil,
mark through holes
in the bracket for
drilling.
or
free stand
Alternatively, make
2 marks 100mm
apart.
Drill 2 holes
2
suitable for the wall
plugs supplied,
then screw to the
wall through the
holes in the bracket.
Place your Caller
3
Display 2000 over
the bracket,
ensuring the two
lugs on the bracket
slot into the base
of the unit as
shown. Then slide
the unit towards
the wall until it
clicks into position.
Free standing
Position 1
Position 2