Programming Options - Electrolux EDC 5371 User Information

Programming options

Objective
Permanently program in the au-
dible signal which reminds you
that the programme is complete.
Adjust detection of degree of
drying:
If the laundry is slightly drier or
slightly damper at the end of the
programme than with the stand-
ard setting.
If the EMPTY WATER (BEHÄL-
TER) display is to remain perma-
nently deactivated when using
an external condensate drain.
1. Turn the programme selector to any programme.
2. Press the AUDIBLE SIGNAL (SIGNAL) button and hold down for approx.
5 seconds.
A brief signal sounds several times. The AUDIBLE SIGNAL (SIGNAL) dis-
play flashes several times.
The setting is permanently programmed.
The setting is cancelled as described under 1 and 2.
1. Turn the programme selector to any programme.
2. Press the AUDIBLE SIGNAL (SIGNAL) and SENSITIVE (SENSITIV) but-
tons at the same time and hold down for approx. 5 seconds.
The current setting appears on the multi-display:
– C0: Setting for drier laundry
– C1: Standard setting
– C2: Setting for damper laundry
3. Press the START/PAUSE button until the setting required appears on the
multi-display.
4. Turn the programme selector to OFF (AUS).
The setting is permanently programmed.
1. Turn the programme selector to any programme.
2. Press the DOOR (TÜR) and SPECIAL CARE (SCHON) buttons at the
same time and hold down for approx. 5 seconds. The multi-display briefly
displays "0"
The EMPTY WATER (BEHÄLTER) display is permanently deactivated.
The setting is cancelled as described under 1 and 2; the multi-display how-
ever briefly displays "1" (rather than "0").
Implementation
19