Download Print this page

Programming Options - Electrolux EDH6370 User Information

Condensation dryer
Hide thumbs

Advertisement

Programming options

Objective
Permanently program in the au-
dible signal which reminds you
that the programme is complete.
Adjust detection of degree of
drying:
If the laundry is slightly drier or
slightly damper at the end of the
programme than with the stand-
ard setting.
If the EMPTY WATER (BEHÄL-
TER) display is to remain perma-
nently deactivated when using
an external condensate drain.
1. Turn the programme selector to any programme.
2. Press the AUDIBLE SIGNAL (SIGNAL) button and hold down for approx.
5 seconds.
A brief signal sounds several times. The AUDIBLE SIGNAL (SIGNAL) dis-
play flashes several times.
The setting is permanently programmed.
The setting is cancelled as described under 1 and 2.
1. Turn the programme selector to any programme.
2. Press the SILK (SEIDE) and AUDIBLE SIGNAL (SIGNAL) buttons at the
same time and hold down for approx. 5 seconds.
The current setting appears on the multi-display:
– C0: Setting for drier laundry
– C1: Standard setting
– C2: Setting for damper laundry
3. Press the START/PAUSE button until the setting required appears on the
multi-display.
4. Turn the programme selector to OFF (AUS).
The setting is permanently programmed.
1. Turn the programme selector to any programme.
2. Press the WOOL (WOLLE) and LONG ANTICREASE (KNITTERSCHUTZ
+) buttons at the same time and hold down for approx. 5 seconds. The
multi-display briefly displays "0"
The EMPTY WATER (BEHÄLTER) display is permanently deactivated.
The setting is cancelled as described under 1 and 2; the multi-display how-
ever briefly displays "1" (rather than "0").
Implementation
21

Advertisement

loading

  Related Manuals for Electrolux EDH6370