Table of Contents
Advertisement
Setup
The special functions that can be set under Setup re-
main permanently stored independent of each drying
cycle – even after the appliance has been switched
off or the mains plug has been removed from the
socket.
Memory 1, 2, 3
Programme combinations can be stored at pro-
gramme knob positions MEMORY 1, 2, 3 and can
then be selected using the programme knob. To do
this, the desired programme combination is first put
together and then stored.
Setting the Memory
Example: Programme position MEMORY 1 is to be
given the following programme combination: COT-
TONS EXTRA DRY (BAUMWOLLE EXTRATROCKEN)
with
SENSITIVE option.
1. Turn the programme knob to COTTONS EXTRA
DRY (BAUMWOLLE EXTRA TROCKEN).
2. Using the OPTION button, set to
and press the OK button. A black bar appears un-
der the
symbol.
3. Press the OPTION button repeatedly until ú SETUP
flashes.
4. Press the OK button. The display changes to the
Special Functions level. Programme memory posi-
tion MEMORY 1 is offered first.
3
To change to another memory position, press
the OPTION button.
5. Press the OK button.
The programme combination is now stored to pro-
gramme knob position MEMORY 1 and in the fu-
ture can be selected directly using the programme
knob.
3
The Memory can be overwritten at any time
with a new programme combination (see
"Changing the Memory"), but cannot be delet-
ed.
Changing the Memory
1. Put together the new programme combination as
required (for an example, see "Setting the Memo-
ry", steps 1 and 2).
2. Press the OPTION button repeatedly until the
ú SETUP symbol flashes.
3. Press the OK button.
4. Using the OPTION button select the memory posi-
tion to be changed, e. g. MEMORY 1.
5. Store the new programme combination using
the OK button.
SENSITIVE
EXTRA DRY
Cycle end at
dýaýa
aýaýaýSýaýaýaýaýa
Tür
U/Min
Option
Porte
T/Min.
Options
Memory 1
Store program?
aýaýa
aýaýaýaýBýaýaýaýa
Tür
U/Min
Option
Porte
T/Min.
Options
12.45
15.16
Ok
Zeit
Ok
Temps
12.45
Ok
Zeit
Ok
Temps
17
Advertisement
Table of Contents
