Epson STYLUS DX4800 Series Basic Operation Manual page 4

Lights
Note:
If no buttons are pressed for 15 minutes, the EPSON STYLUS DX enters "sleep" mode. The On light is lit and a flashing dot appears in the
copy window. To "wake" it press any button except the P On button.
1
2
3
4
5
6
7
8
9
4
Introduction
O = on k = flashing
Light
1 On
b
2 Error
3
B
4 Memory Card *
(Print Index Sheet -A4-,
Print From Index Sheet,
Print All/DPOF/
PictBridge)
5 Copy (window)
6 Plain Paper
Photo Paper
7 A4
10×15 4"×6"
13×18 5"×7"
8 Fit to Page
9 Memory card access
light*
* The EPSON STYLUS DX4200 Series does not have these lights.
Pattern Status
The EPSON STYLUS DX is on.
O
k (slow) The EPSON STYLUS DX is active.
k (fast) The EPSON STYLUS DX is being turned off.
O or k An error has occurred. & "Solving Problems" on
page 18.
An ink cartridge is low. You can continue copying
k
until it is empty.
An ink cartridge is empty or missing.
O
One of the memory card printing options has
O
been selected.
Print All/DPOF/PictBridge light:
Flashing in DPOF mode.
1 to 9 Indicates the number of copies.
- Up to 100 copies will be made, depending on how
much paper is loaded.
E An error has occurred.
H The paper thickness lever has been set to the
^ (envelope) position.
L The paper thickness lever has been set to the
m (standard) position.
P Flashes when a camera with PictBridge data is
connected. When the connected device is not
supported the P double flashes and the
light and Print All/DPOF/PictBridge lights* flash.
. (dot) The product is in "sleep" mode. Press any button
(except the P On button) to "wake" it.
Indicates the selected paper type.
O
Indicates the selected paper size.
O
The product has been set to reduce or enlarge
O
the copy to fit the selected paper size.
A memory card has been inserted.
O
The product is reading/writing data from the
k
memory card.
Never eject a card while this light or the On light
is flashing; otherwise, the data on the card may
be damaged.
b
Error