Epson STYLUS DX4800 Series Basic Operation Manual page 19

Lights/Code Cause
b
Error The index sheet does not
k
match the photos on the
k Print From
memory card.
Index Sheet
Code 4
✽
b
Error An unsupported device is
k
connected.
k Print All/DPOF/
PictBridge✽
Code P double
flashing
b
Error The paper thickness lever
k
is set to the ^ position.
Code H
b
Error A part on the EPSON
O
STYLUS DX needs to be
O B
replaced.
k All other lights
Code E
k All lights There is a problem with the
EPSON STYLUS DX.
Code E
✽ These errors do not appear on the EPSON STYLUS DX4200 Series.
Solution
Remove the memory card and insert the card used to print the index sheet—or place
the correct index sheet on the document table. Then press x Start Color to continue
or y Stop to cancel.
Remove the connected device or press the y Stop button.
When the digital camera is supported, the P flashes normally.
If you have set the lever to the ^ position because you are printing envelope(s),
press x Start Color to continue. Otherwise, set the lever to the m position.
Contact your local authorized service center or contact Epson for a referral. &
"Customer Support" on page 21
Turn the EPSON STYLUS DX off and then back on. If the error does not clear, contact
your local authorized service center or contact Epson for a referral. & "Customer
Support" on page 21
19
Solving Problems