Auto Lcd Off; Auto Power Off; Video Out; Usb Mode - BenQ DC E800 User Manual

Auto LCD Off

The Auto LCD Off setting allows you to adjust the length of time that the LCD screen will
remain lit before turning off to save battery power. Three options are available:
• Off (default)
• 30 sec
• 1 min

Auto Power Off

The Auto Power Off setting allows you to adjust the length of time after which the camera
will power down when inactive. Use the Up/Down navigation buttons to select from the
menu options. Two options are available:
• 5 min (default)
• 2 min

Video Out

The Video Out setting allows you to adjust the video output, depending on the type of your
TV. Use the Up/Down navigation buttons to select from the menu options. Two options are
available:
• NTSC (default)
• PAL

USB Mode

The USB Mode setting allows you to select the transfer method between your camera and
your PC. Two options are available:
• PTP (PictBridge Print): When the camera is connected to a printer by a USB cable
which supports Pictbridge, it can directly print images stored on the media. For
details on PTP function, please See "PictBridge Print (PTP)" on page 34.
• MSDC (default): The camera is set up to act as a mass storage device, allowing only
for transfer of files between your camera and PC.

Date Stamp

The Date Stamp setting allows you to adjust the format in which the date will appear on
each photo or video. You can also deactivate this function if you wish. Setting a date stamp
allows for easy sorting and the date will appear on the photo when printed. Use the Up/
Down navigation buttons to select from the menu options. Four options are available:
• Off (default)
• YYYY MM DD: year-month-date format
• MM DD YYYY: month-date-year format
• DD MM YYYY: date-month-year format
Camera Settings 32
The Setup Menu