Inserting An Sd/Sdhc Memory Card; Turning On; First Time Use - BenQ DC E800 User Manual

13 Camera Setup

Inserting an SD/SDHC Memory Card

The camera features 10 MB internal flash memory but you may also use an optional SD/
SDHC memory card for additional storage.
Follow these instructions to insert the SD/SDHC card.
1. Open the battery compart-
ment on the right side of the
camera.
2. Insert the SD/SDHC card
into the memory card slot as
shown.
3. Close the battery compartment.
To remove the SD/SDHC card, gently push the card until it pops out. Pull out the card
carefully.

Turning On

Press and hold the Power button to turn on the camera. To turn off the camera, press the
Power button again.

First Time Use

Press the Power button as described in "Turning On", a BenQ Logo displays on the LCD
screen.
If the camera is turned on for the first time, the Language menu pops up automatically after
powering on the camera.
After the desired language is selected, the Date and Time menu pops up. Use the navigation
buttons to toggle each field and adjust the value. Press the OK button to confirm.
Note:
If the Date and Time is reset (when running out the battery and not in use for a long period),
the Date and Time setup screen displays automatically.
Inserting an SD/SDHC Memory Card