Shifting; Recommended Shift Points (For Switzerland Only) - Yamaha Virago XV535 Owner's Manual

OPERATION AND IMPORTANT RIDING POINTS
1. Shift pedal
N. Neutral position

Shifting

5
Shifting gears lets you control the
amount of engine power available for
starting off, accelerating, climbing hills,
etc.
The gear positions are shown in the
illustration.
NOTE:
@
To shift the transmission into the neu-
tral position, press the shift pedal down
repeatedly until it reaches the end of its
travel, and then slightly raise it.
@
CAUTION:
@
Even with the transmission in
the neutral position, do not
coast for long periods of time
with the engine off, and do not
tow the motorcycle for long dis-
tances. The transmission is
properly lubricated only when
the engine is running. Inade-
quate lubrication may damage
EAU00423
the transmission.
Always use the clutch while
changing gears to avoid dam-
aging the engine, transmission,
and drive train, which are not
designed to
shock of forced shifting.
@
EC000048
Recommended shift points
(for Switzerland only)
The recommended shift points during
acceleration are shown in the table
below.
CF-01E
NOTE:
@
When shifting down two gears at a
time, reduce the speed accordingly
(e.g., down to 35 km/h when shifting
from 4th to 2nd gear).
withstand the
@
5-3
Shift point
(km/h)
1st 2nd 23
2nd 3rd 36
3rd 4th 50
4th 5th 60
EAU02941