Fuel Tank Cap; Fuel - Yamaha YBR250 Owner's Manual

Fuel tank cap

To remove the fuel tank cap
Insert the key into the lock and turn it
1/4 turn clockwise. The lock will be
released and the fuel tank cap can be
removed.
To install the fuel tank cap
1. Insert the fuel tank cap into the
tank opening with the key inserted
in the lock and with the " " mark
facing forward.
2. Turn the key counterclockwise to
the original position, and then
remove it.
The fuel tank cap cannot be installed
unless the key is in the lock. In addition,
INSTRUMENT AND CONTROL FUNCTIONS
EAU13021
the key cannot be removed if the cap is
not properly installed and locked.
Make sure that the fuel tank cap is
properly installed before riding.

Fuel

EWA10130
1. Fuel tank filler tube
2. Fuel level
Make sure that there is sufficient fuel in
the tank. Fill the fuel tank to the bottom
of the filler tube as shown.
l l l l l
l l l l l
3 - 7
2
1
Do not overfill the fuel tank,
otherwise it may overflow when
the fuel warms up and expands.
Avoid spilling fuel on the hot
engine.
EAU13211
3
EWA10880