Indicator And Warning Lights; Speedometer - Yamaha YBR250 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Indicator and warning lights

3
1. Turn signal indicator light "
2. Neutral indicator light "N"
3. High beam indicator light "
4. Fuel level warning light " "
5. Engine trouble warning light " "
Turn signal indicator lights
" " and " "
The corresponding indicator light flashes
when the turn signal switch is pushed
to the left or right.
Neutral indicator light "N"
This indicator light comes on when the
transmission is in the neutral position.
EAU11003
High beam indicator light "
This indicator light comes on when the
high beam of the headlight is switched
on.
Fuel level warning light " "
This warning light comes on when the
fuel level drops below approximately
4.5 L (1.19 US gal) (1.00 Imp. gal). When
this occurs, refuel as soon as possible.
The electrical circuit of the warning light
/ "
can be checked by turning the key to
"
"ON".
If the warning light does not come on
for a few seconds, then go off, have a
Yamaha dealer check the electrical
EAU11030
circuit.
Engine trouble warning light " "
This warning light comes on or flashes
when an electrical circuit monitoring the
EAU11060
engine is defective. When this occurs,
have a Yamaha dealer check the self-
diagnosis system.
EAU11080

Speedometer

"
EAU11350
1. Speedometer
2. Tachometer
The speedometer shows the riding
speed.
When the key is turned to "ON", the
speedometer needle will sweep once
across the speed range and then return
to zero in order to test the electrical
EAU11470
circuit.
3 - 2
EAU11601