Yamaha YZF-R1S Owner's Manual page 38

INSTRUMENT AND CONTROL FUNCTIONS
Rebound damping force
Adjust the rebound damping force as
follows.
1. Remove the bolt, loosen and re-
move the quick fastener screw,
and then pull the cowling away
from the motorcycle.
3
1. Quick fastener screw
2. Bolt
3. Cowling
2. To increase the rebound damping
force and thereby harden the re-
bound damping, turn the adjusting
screw in direction (a). To decrease
the rebound damping force and
thereby soften the rebound damp-
ing, turn the adjusting screw in di-
rection (b).
1. Rebound damping force adjusting screw
Rebound damping setting:
Minimum (soft):
18 click(s) in direction (b)*
Standard:
14 click(s) in direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
* With the adjusting screw fully turned
in direction (a)
3. Place the cowling in its original po-
sition, install and tighten the quick
fastener screw, and then install the
bolt.
3-24
Compression damping force
1. Compression damping force adjusting bolt
(for fast compression damping)
2. Compression damping force adjusting screw
(for slow compression damping)
Compression damping force (for fast
compression damping)
To increase the compression damping
force and thereby harden the compres-
sion damping, turn the adjusting bolt in
direction (a). To decrease the compres-
sion damping force and thereby soften
the compression damping, turn the ad-
justing bolt in direction (b).