The Control Panel - Zanussi ZDF210 Instruction Book

The control panel

Programme guide
Programme selector dial and On/Off indicator
light:
the selection of a washing programme occurs by
turning the programme selector dial clockwise or anticlockwise,
until the desired washing programme (see "Washing
programmes" chart) corresponds with the programme selection
marker placed on the dial (position On). The On/Off indicator
light illuminates.
The indicator lights of the phases foreseen for the selected
programme start flashing.
To switch off the machine turn the programme selector dial
until the marker on the dial corresponds with the On/Off
indicator light (position Off). The On/Off indicator light turns off.
With the programme selector dial it is also possible to set the
level of the water softener (see specific paragraph).
Half load button:
this function is useful and economical
when only a few dishes need washing reducing the
consumption of water and energy. This option must be linked
to the selection of a washing programme.
The corresponding indicator light will illuminate.
Load the dishes into both baskets (lower basket and upper
basket).
With the selection of this function, the prewash phase is
automatically excluded with programmes Intensive 70°C and
Normal 65°C. (In this case the detergent dose for the prewash
phase is no longer necessary).
The duration of the washing phase with programme Eco 50°C
will be reduced.
With programmes Quick 65°C A 30
not possible to select the half load function (Button
deactivated - indicator light off).
When using this option we recommend to reduce the dose of
detergent that is normally used for a complete load.
Programme selection marker
Door handle
I and Rinse and Hold it is
Start/Cancel indicator light
On/Off indicator light
Programme selector dial
Start/Cancel button
"Start/Cancel" button:
been set, press this button to start the programme.
The start/cancel indicator light (placed above the button)
illuminates.
With this button it is possible to cancel a washing programme
in progress.
Indicator lights:
have the following meanings:
Wash: illuminates when the washing and rinsing
phases are running.
Dry: illuminates when the drying phase is running.
End of programme: illuminates when the washing
programme has ended.
It also has added functions of visual
signalling as:
- the setting of the water softener,
- intervention of an alarm due to the malfunction of
the machine.
As soon as you select a washing programme, the phase
indicator lights for that programme will start flashing.
As the programme starts, the phase indicator lights turn off
except for the indicator light of the phase in progress which will
remain lit with a static light.
Salt refilling indicator light: illuminates when the
salt has run out.
The salt indicator light is never illuminated while a washing
programme is running even if filling with salt is necessary.
7
Indicator lights
Half load button
once a washing programme has