Erase All; Troubleshooting; My Phone Will Not Pair; Troubleshooting My Phone Will Not Pair - Hyundai BlueConnect User Manual

Bluetooth hands free phone system
Table of Contents

Advertisement

Use this command only if you want to erase (delete) the entire phonebook.
BlueConnect® prompts you two times to be sure you do want to delete the phonebook.
Erasing all phonebook records.
At the main menu say, "Phonebook," " Erase All" to delete all
1
phonebook records.
BlueConnect® responds "Are you sure you want to erase everything
from your system phonebook?" Say, "No" if you do not want to delete all
2
phonebook records. BlueConnect® exits the Erase All process or,
Say, "Yes" to delete all phonebook records. BlueConnect® responds,
"You are about to delete everything from your system phonebook. Do
3
you want to continue?"
Say, "No" if you do not want to delete all phonebook records.
BlueConnect® exits the Erase All process or Say, "Yes" to delete all
4
phonebook records. BlueConnect® deletes all phonebook records and
says "Phonebook Erased."
CHECK
Phone and BlueConnect® have power.
Phone is designed to work with BlueConnect®.
Phone was paired properly.
On certain phone models you need to tell the phone
to connect (after initiating the pairing process on some
models only.)
Bluetooth® option on your phone was turned ON.
Phone is not outside of the vehicle while trying to pair
it to BlueConnect®.
Phones that require a SIM card
4 digit PIN number entered in the phone matches the
BlueConnect® PIN number.
Phonebook (Continued)

Troubleshooting

My Phone will not pair.

Make sure that the phone and vehicle ignition is ON. Also make
sure that your phone battery is charged.
Your phone may not work with BlueConnect®. Only phones with
Bluetooth® capability and a hands free profile will work with
BlueConnect®. Phones that support the use of a wireless
headset should work with BlueConnect®. You can go to
www.jciblueconnect.com
BlueConnect® Bluetooth® hands free profile phones.
Refer to the phone's pairing instructions and the BlueConnect®
pairing instructions. Try the pairing process again.
Try pairing again and tell the phone to connect.
Turn the Bluetooth® option to "ON" on your phone.
Place phone inside the vehicle in the front seat area during the
pairing process.
Make sure that it is installed. If not, install a SIM card.
Reprogram using the same four-digit PIN for both PIN requests.
POSSIBLE SOLUTIONS
and view a list of approved
14

Advertisement

Table of Contents
loading

Table of Contents